GY-CA-AP Adhesion Promoter

GY-CA-AP can be a creditable effective powder coating additive which can be applied on the metal. Our GY-CA-AP can be added into the primer or the one-off painting. Both of the method can augment the adhesion of coating and the surface.

Description

Intro

GY-CA-AP can be a creditable effective powder coating additive which can be applied on the metal. Our GY-CA-AP can be added into the primer or the one-off painting. Both of the method can augment the adhesion of coating and the surface.

 

Properties 

Grade GY-CA-AP
Appearance Clear
State Liquid
Solid content 80±1%
Base Oil-based
Chromaticity less than 70/APHA

 

 Applications

  1. PMMA resin
  2. Alkyd/ melamine
  3. Acrylic/melamine
  4. Varieties kinds of coating

 

Advantages

  1. Excellent property of fastening the adhesion of the coating and the surface of non-ferrous metals
  2. No influence the stability of storage
  3. Perfect modification of increasing the impact resistant and the malleability
  4. Highly ability of weather resistant which will not discolor when baking at high temperature
  5. Excellent hardness

 

Instructions

For both pre-treatment and post-adding, when mixing with the primer, the dosage is depends on the adhesiveness of the resin.

 

Suggestion dosage 

The dosage of GY-CA-AP that GYC technical dep. suggest is about 1.5~2.5%. Customers can adjust the dosage according to your specific requirement.

 

Note 

  1. GY-CA-AP has the acid structure of its composition, which can lead to the frosting phenomenon while encounter of some alkaline painting, therefore, we encourage to do the pretest.
  2. GY-CA-AP would cause turbid and separation due to low-temperature condition, consequently, please heat until it return to the original status, but this method would not affect its properties.
  3. Please use our GY-CA-AP with carefully use, avoid the skin contact. 

 

Storage

  1. To save in the area of both dry and closing
  2. To avoid the direct exposure of the sunshine and the fire.
  3. In moderate temperature(during 0°C to 40°C), while under 5°C the status might freeze, please heat the solvent with water bath and mix it.
  4. Please contain the solvent in the full sealing container to prevent the moisture until it use up.

 

Packing

200 KG/25 KG