GY-PFM16 High Effective Impact Modifier (for PP,PE,TPE,TPR,EVA)
GY- PFM16 can enhance both chemical and physical properties, including weather-resistant, impact-resistant, strong elongation strength, excellent durability of low temperature and good optical capacity. The applications are package, film, compound, blow molding, foam products…etc.
Description
Intro
GY- PFM16 is a high effective impact modifier which can be widely used to PP, engineering plastic and general plastic.
GY- PFM16 can enhance both chemical and physical properties, including weather-resistant, impact-resistant, strong elongation strength, excellent durability of low temperature and good optical capacity. The applications are package, film, compound, blow molding, foam products…etc.
GY- PFM16 not only increases impact-resistant of plastic product, but also brings added value and competitive power for customers.
The product is already used to well- known elastomer, engineering and general plastic manufacturers in Japan, Korea, Europe, and USA.
Properties
Grade | GY-PFM16 |
Color | transparent |
Appearance | pellet |
Melt Index | 1.4 g/10min |
Tensile strength 100% | 1.94 MPa |
Tensile strength 300% | 2.24 MPa |
Breaking strength | > 6.89 MPa |
Tensile set | 18% |
Breaking elongation | > 2000% |
Flexural modulus -1% secant | 12.3 MPa |
Tear strength (C mold) | 34.3 kN/m |
Advantages
- Improve flexible ability and impact toughness for plastic
- Good chemical resistance
- Good foam ability due to LCB (long chain branching) properites
- High melt strength properties between general PP an HMSPP
- Enhance scratch resistance
- Increase weather resistance for plastic and elastomer
- Suitable for transparent or colorful products.
- lower shrinkage and compression set
- Improve color ability, surface finish, and soft touch
- High flow ability
- Good bonding ability with PP and mPE
- Match with filler (talc, oil, calcium carbonate..etc)
- Excellent impact resistance at low temperature (-20℃)
Applications
- Polypropylene (PP)
- PE : HDPE,LDPE,LLDE
- EVA
- TPR,TPE, TPE modified
- Film blowing
- blow molding and foam products
- Hollow extrusion and calendering
- Various film
- Fiber
- Sheet
- Polyolefin modified
- Plug-in for internal and external
- Non-woven fabric
- Package
- Personal care supplies
- Wire & cable
- Soft-touch handle
- Foam products for leisure, sport and general consumer.
Addition
Elastomer:5~10 PHR;
Hard Plastic :6~10 PHR;
Soft Plastic :5~8 PHR;
General& Engineering Plastic:3~5 PHR
The dosage is evaluated and recommended by GYC customers after used.
The dosage can be reduced or increased for different need.
Package
25KG/BAG