GY-PFM16A Scratch resistance and Impact Modifier
GY-PFM16A is scratch resistance and impact modifier designed for PE, PET, PP, etc. GY-PFM16A can improve the plastic’s chemical and physical properties, including impact resistance, weather resistance, scratch resistance, extension, etc.
Description
Intro
GO YEN CHEMICAL INDUSTRIAL CO., LTD. (GYC GROUP) is a leading manufacturer of specialty chemicals in Asia. We devote ourselves to supplying products and solutions to our customers worldwide to satisfy and expand the market needs.
GY-PFM16A is a scratch resistance and impact modifier designed for PE, PET, PP, PBT, etc. GY-PFM16A can improve the plastic’s chemical and physical properties, including impact resistance, weather resistance, scratch resistance, extension, etc.
It can be used in packing material, thin-film, compounding, wire drawing, extrusion blow molding, and so forth, which increases the additional value of end-products.
GY-PFM16A is now a product that has been used by a number of well-known manufacturers of engineering plastics, general plastics, and elastomers in Japan, Korea, Europe, and the USA.
Properties
GRADE | GY-PFM16A |
Appearance | Pellet |
Color | Transparent |
Melt flow index | 1.4 g/10min |
Tensile strength 100% | 1.94 MPa |
Tensile strength 300% | 2.24 MPa |
Breaking strength | > 6.89 MPa |
Permanent deformation under tensile stress | 18% |
Elongation at break | > 2000% |
Flexural modulus -1% secant modulus | 12.3 MPa |
Tearing strength (C-Mold) | 34.3 kN/m |
Features/Benefits
- Provides plastics with increasing toughness and elasticity
- Provides remarkable chemical and weather resistance
- Improves scratch and abrasion resistance
- Can be used in colored or transparent product
- Diminishes the contraction ratio
- Excellent fluidity
Applications
- PE: HDPE, LDPE, LLDPE
- PET: CPET, PET-G
- PET product: tape, sheet, composite panel, automotive parts, electronic products, machines, etc.
- PET thin film, stretch film, wire drawing, packing material, etc.
- PET extrusion/injection molding, extrusion blow molding, etc.
- PP
- PBT
- EVA
- Elastomer: TPR, TPE
- Blowing film, cast file
- Calendered, extruded profiles, foamed goods
Adding Rate
Recommended adding rate: 5~15%
The adding rate is to be regarded as a general guideline that can be adjusted according to the type of material and the expected effect.
Packing
25KG/bag