GY- PFM17 Impact Modifier ( for PP,PE,TPR,TPU,TPE)
GY- PFM17 can be compounded to various of engineering and general plastic; Moreover, it can enhance both chemical and physical properties, including impact-resistant, weather-resistant, strong elongation strength, excellent durability of low temperature, lower melt temperature,dispersibility, foaming properties…etc. The applications are package, film, compound, blow molding, foam products, PP PE modification…etc.
Description
Intro
GY- PFM17 is a high effective impact modifier which can be widely used to PP, PE, TPR , engineering plastic and general plastic.
GY- PFM17 can be compounded to various of engineering and general plastic; Moreover, it can enhance both chemical and physical properties, including impact-resistant, weather-resistant, strong elongation strength, excellent durability of low temperature, lower melt temperature,dispersibility, foaming properties…etc. The applications are package, film, compound, blow molding, foam products, PP PE modification…etc.
GY- PFM17 not only increases impact-resistant of plastic product, but also brings added value and competitive power for customers.
The product is already used to well- known elastomer, engineering and general plastic manufacturers in Japan, Korea, Europe, and USA.
Properties
Grade | GY- PFM17 |
Color | Transparent or translucent |
Appearance | elastomer |
Melt Index | 9.1 g/10min |
Density | 0.863 g/cm3 |
Melting point | 106 ℃ |
Tensile set | 18% |
Breaking elongation | > 2000% |
Advantages
- Flexible ability and impact toughness for plastic
- Good chemical resistance
- Improve Viscosity Modifier
- Good foam ability due to LCB (long chain branching) properties
- High melt strength properties between general PP an HMSPP
- Enhance scratch resistance
- Increase weather resistance for plastic and elastomer
- Suitable for transparent or colorful products
- lower shrinkage and compression set
- Improve color ability, surface finish, and soft touch
- Excellent compatibility, good bonding ability with PP and mPE
- Match with filler (talc, oil, calcium carbonate..etc), enhance the mixture ratio of film, granulation, compound
- Excellent impact resistance at low temperature (-20℃)
- Improve the toughness (crystal density) of product, pellets are more stronger to avoid embrittlement
- Enhance the dispersibility of organic pigment and mineral filler
- Good thermal stability, the melt temperature can be reduced during mixing process.
- Improve blow molding and blown film performance, bubble stability.
- Increase the puncture resistance of film
- Better tensile and tear strength
Applications
- Polypropylene (PP), polyethylene (PE), EVA
- Polyolefin pelletizing, pellet modification
- TPR series : SBS,SEBS,SIS
- PE : HDPE,LDPE,LLDE
- Improve the disadvantage of embrittlement and strength decreased when PP, PE in high filler (calcium carbonate, talc, wood flour, etc …)
- Cable & wire
- TPU,TPR,TPE, PPE
- Blow molding and foam products
- Hollow extrusion and calendering
- Thin Film, Blown film, Breathable Film
- Fiber
- Plug-in for internal and external
- Package and personal care supplies
- Soft-touch handle
- Foam products for leisure, sport and general consumer.
- PP filament, woven and non-woven fabric application
Application-Blown film
Addition
General & engineering plastic:5 ~8PHR
Elastomer:5~10 PHR;
Hard plastic:6~10 PHR;
Soft plastic:5~8 PHR;
The dosage is evaluated and recommended by GYC customers after used.
The dosage can be reduced or increased for different need
Package
25KG/BAG